UK: +44 (0)1524 805288 | EU: +353 1513 3758 | E: info@arccompliance.com

FAQs EU Packaging and Packaging Waste Regulation (PPWR) 2025/40

What is the PPWR and why has it been introduced?

Regulation (EU) 2025/40 is the European Union’s Packaging and Packaging Waste Regulation (PPWR) which establishes a harmonised legal framework for new packaging and packaging waste across the European Union.  

Its primary objective is to ensure the smooth functioning of the internal market while significantly reducing the environmental and health impacts associated with packaging throughout its life cycle. 

The PPWR introduces obligations such as recyclability and reuse targets, restrictions on hazardous substances, and requirements for eco-friendly design and labelling. 

What packaging does the PPWR apply to? 

The PPWR applies to all packaging placed on the EU market, whether the packaging is empty or filled, regardless of the material used, and whether produced within the Union or imported from third countries. The PPWR also covers all packaging waste generated within the EU. 

Packaging is defined broadly, as any item intended for containment, protection, handling, delivery, or presentation of products, including its components. However, items that form an integral part of a product and are disposed of together with it are excluded. 

Does the PPWR apply to UK businesses?

Yes. Businesses outside the EU selling packaged products into the EU market will need to comply with the PPWR. 

How can Authorised Rep Compliance help my business? 

The PPWR should be looked at in two parts (new packaging and packaging waste). 

Authorised Rep Compliance can be the EU Authorised Representative for the PPWR with respect to product compliance and placing your products and new packaging on the EU market only.  

As part of our service, we will incorporate the responsibilities of the Authorised Representative for “new” packaging as required under the PPWR, into existing contracts, there will be no additional annual charge for this. 

To support customers preparing for the PPWR, guidance notes are available on our website and our sister company Product Compliance Support has prepared some template documents, which may be of use, including PPWR compliance checklists, technical documentation templates and a declaration of conformity, these can be viewed and purchased here. 

Authorised Rep Compliance will be able to review the completed templates and check that your packaging is compliant with the PPWR.  There will be a small charge for this review. 

Authorised Rep Compliance unfortunately cannot act as your EU Authorised Representative for EPR (packaging waste) as we do not cover the traditional requirements of the EPR. For EPR requirements we recommend joining a producer compliance scheme.  

Are importers responsible for packaging compliance? 

Yes. Importers placing packaged products onto the EU market are responsible for ensuring compliance before products are placed on the market. 

Are small businesses exempt? 

There is no general exemption for micro-enterprises from EPR obligations. All producers are responsible for waste management of the packaging that they make available on the territory of a Member State for the first time.   

Will businesses need technical documentation? 

Yes. Businesses should expect increasing requirements to maintain documented evidence demonstrating packaging compliance. 

From which date will companies have to carry out the conformity assessment procedure mandated by the PPWR? 

In general, the PPWR applies from 12th August 2026 (PPWR Article 71). However, certain key provisions will apply only from the date specified therein. In several cases, the entry into force of the obligation is linked to the expiry of a certain time after the adoption of the necessary implementing or delegated acts. This will give stakeholders and Member States sufficient time to adapt. When a relevant provision does not specify a specific date for its entry into application, the general application date of 12th August 2026 applies. Companies will therefore have to carry out the conformity assessment procedure by 12th August 2026. 

What date does the obligation on minimisation of substances of concern (SoC) apply?

The general obligation to minimise SoC in PPWR Article 5(1) and the limits on four heavy metals in PPWR Article 5(4) apply to all packaging from 12th August 2026. 

How is the supplier of packaging obligated to comply with the data requirements of substances of concern (SoC)? 

Obligations of packaging suppliers are detailed in PPWR Article 16. Accordingly, suppliers must provide the manufacturer with all the information and documentation necessary for the manufacturer to demonstrate the conformity of packaging and the packaging materials, either in paper or in electronic format. Manufacturers need this information from suppliers of packaging materials or converters in order to identify PFAS or other SoC present in packaging and draft the declaration of conformity demonstrating compliance with PPWR Article 5. 

The requirement is to minimise substances of concern and where the sum of the concentrations of four heavy metals (Lead (Pb), Cadmium (Cd), Mercury (Hg) and Hexavalent Chromium (Cr V)) in packaging or packaging components must not exceed 100 mg/kg (100 ppm) (PPWR Article 5(4)). 

Do the restrictions apply only to materials used in packaging manufacturing or also to the materials and the associated inks, varnishes, glues and adhesives? 

The limits apply to the packaging unit as a whole, including the associated inks, varnishes, glues and adhesives placed on the market by the manufacturer. The latter is the person responsible for drawing the technical documentation needed to prove compliance. 

Is it sufficient that a single declaration of conformity is drawn up for packaging or a packaged product? Or is it required that a dossier of all required declarations of conformity is drawn up as a single document? 

When a packaged product is subject to more than one Union act requiring an EU declaration of conformity, a single EU declaration of conformity may be drawn up for all Union acts. That declaration must state the Union acts concerned and their publication references. It may consist of a dossier of relevant individual EU declarations of conformity. 

Therefore, manufacturers have a margin of discretion in assessing the necessity of drawing up a single declaration of conformity.  

However, in case a single declaration of conformity is drawn up, it must clearly distinguish the packaging from the packaged products. The manufacturer may decide whether the single declaration of conformity is presented as a dossier with different declarations of conformity or as a single document. If they are presented as a single document, the conformity assessment for the packaged product and the packaging should still be done and presented separately. 

Is the assessment of conformity to be drawn up for each part of the packaging, such as a bottle, closure and label, or for the entire packaging unit? 

The assessment of conformity must be performed, and the declaration of conformity must be drawn up, for the entire packaging unit. The assessment should include all integrated and separate components. 

Can packaging that was placed on the market before the date of application of PPWR remain on the market? 

In general, packaging which was lawfully placed on the market before 12th August 2026 may remain on the market without having to be brought into compliance, withdrawn or recalled.  

If a packaging is made from the same materials, but has different sizes, should a declaration of conformity be drawn up for all sizes/dimensions or is just one declaration for all sizes/dimensions enough? 

According to PPWR Annex VII, the manufacturer must draw up a written declaration of conformity for each packaging type. The declaration of conformity must identify the packaging for which it has been drawn up. The documentation shall make it possible to assess the packaging’s conformity with the sustainability requirements, laid down in PPWR Articles 5 to 12. The technical documentation must specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture, use and operation of the packaging. For example, the assessment of the minimisation requirement will depend on the packaged product whereas the assessment of recycled content might depend on the weight of the packaging. 

It follows that the declaration of conformity should be drafted at the level where packaging has the same characteristics in view of the applicable requirements and the packaged products. Therefore, if the products differ, a manufacturer should not draft a single declaration of conformity for all packaging placed on the market. 

Does transport packaging also require a conformity assessment and a declaration of conformity? 

There is no exemption for transport packaging. Different packaging types, such as pallets, pallet collars, wrappings and straps, must undergo separate assessments and must have separate declarations of conformity. 

Who will monitor if the recyclability assessment carried out by the manufacturer is correct? 

The manufacturer is obliged to carry out the recyclability performance grade assessment. The result of this assessment must be included in the technical documentation before the packaging is placed on the market. Market surveillance authorities will carry out checks based on their national plans and should apply penalties set at national level in accordance with PPWR Article 68. 

How are the packaging waste reduction targets going to be implemented? 

The implementation of packaging waste reduction targets is the responsibility of each Member State. It is Member States’s responsibility to reach the target and put in place the waste reduction measures necessary to reach the targets set out in PPWR Article 43. While PPWR harmonises several packaging waste prevention measures, such as laying down reuse targets, refill and reuse obligation for take-away sector, packaging bans, and minimisation of packaging requirements, including empty space thresholds, it is up to the Member States to implement some of these harmonised measures, as well as to lay down possible additional national waste prevention measures necessary to reach the targets set out in PPWR Article 43(1). 

What is Extended Producer Responsibility (EPR)? 

Extended Producer Responsibility (EPR) is an environmental policy approach that makes manufacturers and brand owners financially and operationally responsible for the entire lifecycle of their products, especially disposal and recycling at the end-of-life stage. 

To what extent does the PPWR harmonise national EPR schemes? 

The PPWR harmonises certain administrative EPR obligations to lower the administrative burden for economic operators selling packaging or packaged products in multiple Member States. These requirements are related to registration, reporting deadlines and frequency, and the granularity of the data that needs to be reported. 

Can Authorised Rep Compliance be our EU Authorised Representative for EPR? 

Authorised Rep Compliance unfortunately cannot act as your EU Authorised Representative for EPR (packaging waste) as we do not cover the traditional requirements of the EPR. For EPR requirements we recommend joining a producer compliance scheme.  

Do we need an Authorised Representative in each country? 

With regards to appointing an EU Authorised Representative for EPR it is correct that you will need one in each member state.